Automatic Steel Plate Shot Blasting Machine for Surface Cleaning
GENERAL DESCRIPTION:
All Shot Blast Cleaning Machines include these basic design criteria:
1) Blast Wheel(s) - The wheel(s) propels or throw(s) the abrasive media.
2) Work Handling system - depending on the design type of machine this may be rubber tumbling mill apron belt, fixture of hooks or pockets, hanger with hooks, rotary table or tables, or pass-through roller or belt conveyor that transfer the work piece(s) through the blast zone.
3) Electrical System - The wiring, controls, and motors to power and safely operate the system.
4) Abrasive Reclaim System- Transfers the abrasive mix back to the Abrasive Storage Hopper.
5) Separation System - The method that the machine has to remove contaminate waste, broken down media or dust from the reusable "good" abrasive.
6) Abrasive Storage System - The storage hopper system that effectively provides consistent media to the blast wheel.
7) Ventilation System - The Dust Collection System provides negative pressure to the system to assure dust free operation as well as performs the pneumatic separation of the abrasive and waste mix.
DETAILED DESCRIPTION:
Q6915 type roller conveyor type steel plate shot blasting machine is mainly composed by blast cleaning chamber, front and back accessory chambers, blasting wheel assembly, abrasive recycling and purifying system, roller conveying system, pneumatic control system and electric control system etc.
TECHNICAL DATA SHEET:
| Model |
Q6920 |
| Size of workpieces (L*W*H) |
10000×2000×400 |
| Opening size(W*H) |
2200×600 |
| Loading capacity |
1000Kg/m |
| Cleaning speed (m/min) |
0.5-2m/min |
| Cleaning chamber (L*W*H) |
2000×3000×2750mm |
| Roller conveyor length |
20×500=10000mm |
| Blasting wheel model(belt driven) |
Q034 |
| Power of blasting wheel (KW) |
6*15kw |
| Blasting quantity (Kg/min) |
6*250Kg/min |
| Abrasive circulation qty (t/h) |
90t/h |
| Blasting speed (m/s) |
74m/s |
| Dust collector ventilation volume (m³/h) |
24000m3/h |
| Dust collector model |
HR-32(FBD-120) |
| Centrifugal blower (KW) |
22KW |
| Total power (KW) |
≈170 |
The series of Q69 steel plate shot blasting pre-treament line are mainly consist of warm-up, shot blasting and spray painting and drying process.It applies to shipping, car, motorcycle,bridge, machine ect which is in the line of steel board, section and structure casting to wipe of surface rusting and paiting art.
| Parameter |
unit |
Q698 |
Q6912 |
Q6915 |
Q6920 |
| The effective cleaning width |
mm |
800 |
1200 |
1500 |
2000 |
| The room feed-in size |
mm |
100x400 |
1400x400 |
1700x400 |
2200x400 |
| The length of workpiece |
mm |
1200-12000 |
1200-12000 |
1200-12000 |
1200-12000 |
| The speed of wheel conveyer (stepless speed variation ) |
m/min |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
| The thickness of cleaning steel sheet |
mm |
3-60 |
3-60 |
1.5-60 |
3-60 |
|
The section steel
specification
|
mm |
800x300 |
1000x300 |
1500x300 |
2000x300 |
|
The quantity of shot
blasting
|
Kg/min |
4x180 |
4x250 |
4x250 |
6x250 |
|
The first enclosed
quantity
|
kg |
400 |
4000 |
4000 |
4500 |
| Roll brush adjusting height |
mm |
200 |
200 |
350 |
450 |
| Air capacity |
m³/h |
22000 |
17560 |
19000 |
19550 |
| Exterior size |
mm |
25017x4500x9015 |
12180x4250x7095 |
15200x5370x6797 |
30650x6850x9095 |
| Total power(except for dust cleaning) |
kw |
90 |
78.3 |
113.5 |
156.6 |
Product Tags:
|
|
Surface Cleaning Steel Shot Blasting Machine , Steel Shot Blasting Equipment For Machine Images
|
